Dryer amino fatty acids, amino fatty acid spray dryer, Holy Man dry and you create a the future spray dryer liquid process shaping and drying industry's most widely used technology. Suited for powdery, granular solid product generated from solutions, emulsions, suspensions and pasty liquid feedstock. Therefore, when the finished product particle size distribution, residual moisture content, bulk density and particle shapes must meet precise criteria, spray drying is an ideal process. The high-speed centrifugal spray dryer is filtered and heated by air to enter the air distributor at the top of the dryer, the hot air evenly into the drying chamber spirally. The high-speed centrifugal atomization of feed liquid through the top of the tower body (rotation) is sprayed into a very fine mist of liquid bead, contact with a hot air stream and, for the finished product can be dried in a very short time. Finished output continuously from the bottom of the drying tower and the cyclone, the exhaust gas is evacuated by the fan. Spray dryer features: fast drying, the feed liquid after the spraying, the surface area is greatly increased, in a stream of hot air, and instantly can be evaporated to 95% -98% of the water, just a few seconds to complete the drying time, especially for drying heat sensitive materials. ● The product has good uniformity, fluidity and solubility, high purity and good quality. The production process is simplified, convenient control. For a moisture content of 40-60% (special materials up to 90%) of liquid can be dried into a powder or grain products, after drying without crushing and screening, to reduce the production processes, to improve the purity of the product. On product particle size, bulk density, moisture, within a certain range by changing the operating conditions to adjust, easy to control and manage.