The production orders isophthalic stearate dryer, isophthalic distearate, roller blade dryer, roller blade drying Overview: Roller blade dryer is heated to an internal conduction type rotating continuous drying equipment. Rotation of the drum through its lower chute, the adhesive with a thickness of the membrane material, the heat through the pipeline to the inner wall of the drum, and conduction into the drum outer wall, and then conducted to the membrane material, so that the humidity of the membrane material was evaporated off wet, The moisture content of the materials are dry. Dried material shovel scraper means in the surface of the roller from the drum to the scraper placed below the auger, concentrated dry material through the auger package. Features: ● high thermal efficiency. Drum dryer heat transfer mechanism is thermal conductivity, heat transfer direction is consistent throughout the operating cycle, in addition to cover heat dissipation and thermal radiation losses, and the remaining heat all for the tube material film of moisture evaporation, thermal efficiency up to 80% -90%. ● operating flexibility and wide applicability. Adjustable, many drum dryer drying factors. Such as the concentration of the feed, the film thickness of the coating material, the temperature of the heating medium, the drum rotation speed, etc., can be changed to the drying efficiency of the drum dryers, and many other factors implicated each. Bring great convenience to the drum drying operation, so that it can adapt to the drying of a variety of materials and production requirements. ● The drying time is short. Materials dry cycle is generally only 10-300 seconds, suitable for heat-sensitive materials. If the drum dryer is provided in the vacuum vessel, can be run under reduced pressure. ● The drying rate. Due to the thin membrane material of the coating is put on the wall of the cylinder, the ships in the 0.3-1.5mm, and the heat transfer, mass transfer in the same direction, the surface of the membrane material can be maintained 20-70kg? H2O/m2? H of evaporated strength. Technical Data Sheet: Specifications drum size (mm) effective heating area (m2) drying capacity (kg / h) Steam consumption (kg / h) Motor power (kw) Dimension (mm) Weight (kg) HG-600 Φ600 × 800 1.12 40-70 100-175 1.1 1700 × 800 × 1500 850 HG-700 Φ700 × 1000 1.65 60-90 150-225 2.05 2100 × 1000 × 1800 1210 HG-800 Φ800 × 1200 2.26 90-130 225-325 3.75 2500 × 1100 × 1980 1700 HG-1000 Φ1000 × 1400 3.30 130-190 325-475 4.75 2700 × 1300 × 2250 2100 HG-1200 Φ1200 × 1500 4.24 160-250 400-625 4.75 2800 × 1500 × 2450 2650 HG-1400 Φ1400 × 1600 5.28 2